Case Studies

Most of our work is carried out on a confidential basis or under NDA agreements as our lubricants and chemicals are utilised inside other manufacturers device/end products; but we always try to publish case studies in order to highlight the variety of industry sectors and applications we are involved in.

Below are some of the case studies we have managed to pull together. We are always interested in collaborating with customers to ‘problem solve’ their device or design problem. If you are interested in providing some pictures or a video in return for a free sample of product, please get in contact with us using the contact page on this website.

Motorcycle Ride by Wire Throttle Damping-Case Study

Motorcycle Ride by Wire Throttle Damping-Case Study

A modern motorcycle ride by wire throttle (sometimes called ‘drive by wire’) refers to the absence of mechanical linkage between the accelerator and throttle. Older and conventional motorcycle throttles utilise a cable twist grip with considerably more friction in the mechanism preventing inadvertent opening of the throttle, for example when going…

Watling JCB case study-Electrical Connector Grease

Watling JCB case study-Electrical Connector Grease

Watling JCB sell new and used JCB excavators, loaders and other JCB construction machinery. Service engineers were experiencing water ingress issues on the engine to chassis harness connector (known as the interconnect), the resulting corrosion of the connector pins causing loss of connectivity over time. This electrical connector which has…

End of content

End of content