Independent squeaks and rattles testing

The LIP Antifriction Coating range is ideal for automotive interior trim noise prevention and elimination. Often we are asked to prove the range is effective when applied to vehicle interior trim parts. We are very confident that the products meet customer performance and durability expectations and refer customers for independent testing with Ziegler Instruments GmbH.

Find more about of LIP antifriction coating product range here. Or visit our online store.

Vehicle door noise problem, before and after customer video

Vehicle interior trim noise can by very annoying. A private/retail customer had an issue with their car door which was generating a creaking sound while the vehicle was in motion. The customer contacted us for advice and used the AC F-27 product on various hard plastic contact points in the…

Packaging and Dispensing Reference Squeaks & Rattles

Breakdown of the 40ml felt pen

The 40ml felt pen is used to apply some of the LIP Antifriction Coating range. We often get asked about the felt tip as it can wear quite quickly on some rough surfaces; the lifespan can be double by simply extracting, rotating 180°C and re-inserting. Also many customers wish to…

Aerospace Automotive Aviation Base Oil articles Bearing Chassis Conductive Grease Connector Grease Damping Grease Electrical Gear Interior Lead Screw Misc Potentiometer Power Tool Powertrain Reference Squeaks & Rattles Steering Suspension Switch Grease Theory Vacuum & Cleanroom

Base oil viscosity demonstration

When selecting a synthetic grease for a customer, we often discuss oil viscosity and the implications of higher and lower base oil for their application. We decided to make it easier with a video explanation so our customers can better understand the centistoke (cSt) numbers on a data sheet. This…

Automotive Connector Grease Electrical Featured Testing

Electrical connector grease water resistance demonstration with Tribosyn 330

Water ingress protection is one of most common reasons for considering the use of a connector lubricant. The ‘go to’ grease in our range for moisture/water protection is Tribosyn 330. It should be noted that we have a range of connector lubricant products available for other connector problems such as…

Featured Testing

Tribological Testing by 4 Ball Testing Methods

This article is focused on determining tribological characteristic of a lubricating grease, using two ASTM test methods, the 4-Ball EP Tester and 4 Ball Wear. The 4 Ball EP Tester focuses on Extreme pressure (EP) properties and the 4 Ball Wear focuses on wear scar (WS), and coefficient of friction…

Testing

Dropping point test (ASTM D-2265)

Dropping Point is also known as ASTM Method D-2265. The dropping point of a grease is the temperature at which it passes from a semi-solid to a liquid state. The dropping point test determines the cohesiveness of the oil and thickener of a grease, or when the thickener breaks down….

Similar Posts