Van Diemen Films Case Study-Damping Grease

How often should AC612/21 be agitated?

Antifriction Coating felt pen refilling idea

Independent squeaks and rattles testing

Why choose a grease rather than an oil?

Breakdown of the 40ml felt pen

Adding a UV dye to LIP Antifriction Coating products

5gram tube overview

25gram tube overview

50gram tube overview

100gram tube overview

Base oil viscosity demonstration

Damping Grease demonstration

Compatibility testing format for lubricant exposure to plastic or rubber

Electrical connector grease water resistance demonstration with Nyogel 760G

Specialist electrical connector lubricants do not cause increased circuit resistance

Lubricant Tribological Testing by SRV®

Tribological Testing by 4 Ball Testing Methods

Electrical fretting corrosion can be prevented with a synthetic connector grease

Vehicle parcel shelf noise issue eliminated

Vehicle window seal noise problem fixed with AC602/2

Aircraft engine component lubrication overview

Automotive strut/shock lubrication application overview

Linear guide component lubrication in a semiconductor-cleanroom environment

Satellite component lubrication overview

Vacuum Stability and Outgassing Test (ASTM E-595)

Grease Penetration Test (ASTM D-217 and ASTM D-1403)

Oil separation test (ASTM D-6184)

Electrical Terminal Fretting Wear Test

Lubricant Evaporation test

Dropping point test (ASTM D-2265)

Copper corrosion test (ASTM D-4048)

Vehicle seat headrest post lubrication

Oil separation of grease

1234Page 3 of 4