A satisfied customer sent us some footage of how a damping grease improved the performance and characteristics of their radio controller, specifically the small joy sticks or rather the two axis gimbal. Damping grease has a number of uses but often is utilised as a grease is a cost effective…
ATVs endure harsh conditions, which put the machine and individual components to the test. The electrical components on an ATV are chosen for their durability and often are protected by Ingress Protection (IP) rated enclosures. Given enough time, it’s likely that with enough water, salt, dust, dirt, thermo cycling and…
eBikes are growing in popularity and so is the battery technology associated with these exciting bicycles. Some problems that can occur with eBikes are familiar to electrical engineers/technicians in a number of sectors; electrical connector oxidation, water ingress, contact wear and even the infamous fretting corrosion phenomena. A private customer…
A prospective customer got in contact seeking an alternative to the now discontinued Rocol® Kilopoise™ damping grease. The application was the opening mechanism of a photo scanner feed table; the customer being a company that specialises in the service and refurbishment of photo scanners. The feed table opening mechanism relies…
Vehicle interior trim noise can by very annoying. A private/retail customer had an issue with their car door which was generating a creaking sound while the vehicle was in motion. The customer contacted us for advice and used the AC F-27 product on various hard plastic contact points in the…
Watling JCB sell new and used JCB excavators, loaders and other JCB construction machinery. Service engineers were experiencing water ingress issues on the engine to chassis harness connector (known as the interconnect), the resulting corrosion of the connector pins causing loss of connectivity over time. This electrical connector which has…
Automotive window seal noise can be a real problem. There are various types of problem but the one encountered in this recent project was popping or clicking sound reported by an automotive OEM. The noise was generated when a rubber seal was compressed, which was happening intermittently over certain uneven…
End of content
End of content