Sometimes it can be smaller than a grain of sand. Manufacturing equipment in Vacuum and cleanroom environments are so sensitive that even microscopic particulates can cause product failure. In a bearing, for example, any particle that acts like a ‘speed bump’ in the motion of the bearing, no matter how…
We have a number of base oils to select from when formulating a grease. Quite often the first way to start the product selection process is ruling out grease that doesn’t have the temperature capability that is required in your application. The chart featured on this page gives the reader…
The Knudsen effusion test method is used to determine the vapour pressure at several temperatures. Below is an example of how the Knudsen vapour pressure test results are displayed on a technical data sheet of one of our lubricants: As you will see, our chosen unit of measure is Torr.
If you are trialling the use of a grease or oil in a prototype device then you will appreciate how crucial lubricants can be; extending the functional life of components, improving the tactile feel of customer operated controls…the reasons to include a lubricant are many and well worthwhile. Before you…
What constitutes a grease? There are three main components that make a grease, base oil, thickener (sometimes called gellent) and an additive package. Making a grease is thought to be like extreme cooking and in the video, we tried to give an insight into the almost bewildering options and permutations…
End of content
End of content