theory

Why use an ultrafiltered lubricant in a cleanroom or vacuum environment?

Why use an ultrafiltered lubricant in a cleanroom or vacuum environment?

Sometimes it can be smaller than a grain of sand. Manufacturing equipment in Vacuum and cleanroom environments are so sensitive that even microscopic particulates can cause product failure. In a bearing, for example, any particle that acts like a ‘speed bump’ in the motion of the bearing, no matter how…

Understanding the role of antioxidants in lubricants

Understanding the role of antioxidants in lubricants

Antioxidants are additives designed to prolong the life of a lubricant by increasing the oxidative resistance of the base oil. Antioxidants allow lubricants to operate at higher temperatures than would otherwise be possible without them. Many synthetic lubricants, especially hydrocarbon-based lubricating oils, are susceptible to degradation by oxygen. This oxidation…

Not Recommended-Silicone grease use on electrical connectors

Not Recommended-Silicone grease use on electrical connectors

Silicone oils are dielectric and so is silicone grease, silicone is generally low cost and widely available. However we do not recommend using any silicone based lubricant for use on electrical connectors or contacts. Why is this? It’s a fundamental disagreement in theory between ourselves and other companies that offer…

Lubricant Additive overview

Lubricant Additive overview

There are a variety lubricant additives that we have the ability to include in our grease formulations. Note that we describe our additives, we use terminology relating to the benefit of the additive rather than than giving details of the chemical way in which the benefit is achieved; we don’t…

Lubricants and possible plastic or rubber compatibility issues

Lubricants and possible plastic or rubber compatibility issues

If you are trialling the use of a grease or oil in a prototype device then you will appreciate how crucial lubricants can be; extending the functional life of components, improving the tactile feel of customer operated controls…the reasons to include a lubricant are many and well worthwhile. Before you…

End of content

End of content